Juniper WLA522 Guida di Installazione Scaricare il pdf (Pagina 22)

Wireless LAN Access Point WLA522 and WLA522E Quick Start Guide Part Number: 530-042353 Rev.01

Figure 18: Step 3—Placing the Bracket on the Junction Box

4. Pull the Cat 5 cable about 15 centimeters (about 6 inches) out of the junction box and through the port

connector opening to create enough slack to insert the cable into the port connectors.

5. Insert the Cat 5 cable into the connector.

6. Install the Kensington lock, if you plan to use one.

a. Loop the Kensington lock cable around an object that cannot be moved or damaged by a person

pulling on the cable.

b. Insert the key into the Kensington lock.

c. Insert the Kensington lock into the security slot on the AP.

d. Rotate the key right or left to secure the lock to the AP.

e. Pull on the lock to verify that it is secured to the AP.

f. Remove the key.

7. Lift the AP into place on the universal mounting bracket. Make sure the cable feeds properly into the

junction box as you lift the device, and does not become trapped between the AP and the bracket.

8. Lock the AP onto the bracket by inserting a small-pointed instrument or a paperclip into the Lock hole on

the AP as shown in Figure 19.

Warning: To prevent possible damage to the AP, make sure the device is fully locked onto the bracket

before releasing it.

Junction box

Port connector

opening

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 34 35

Nessun commento

Juniper WLA522 Guida di Installazione Pagina 22