Juniper WLA522 Guida di Installazione Scaricare il pdf (Pagina 20)

Wireless LAN Access Point WLA522 and WLA522E Quick Start Guide Part Number: 530-042353 Rev.01

10. Lift the AP into place on the universal mounting bracket as shown in Figure 14. Make sure the cable feeds

properly into the ceiling as you lift the device, and does not become trapped between the AP and the

bracket.

Figure 14: Step 9—Placing the AP on the Bracket

11. Lock the AP onto the bracket by inserting a small-pointed instrument or a paperclip into the Lock hole on

the AP as shown in Figure 15 below.

Figure 15: Step 10—Locking the Bracket

12. To ensure that the AP is fully locked onto the bracket, gently pull down on the AP and attempt to rotate it

from side to side.

13. If the AP comes off the bracket, relock the device onto the bracket.

14. If the AP requires an external antenna, install and connect the antenna.

Warning: To prevent possible damage to the AP, make sure the device is fully locked onto the bracket

before releasing it.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Nessun commento

Juniper WLA522 Guida di Installazione Pagina 20